INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT CAMSHAFT POSITION SENSOR |
 |
- Measure the resistance of the sensor.
- Standard resistance:
Tester Connection
|
Specified Condition
|
1 (G+) - 2 (G-)
|
835 to 1,400 Ω at Cold
|
1 (G+) - 2 (G-)
|
1,060 to 1,645 Ω at Hot
|
- NOTICE:
- "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the camshaft position sensor.