2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT THERMOSTAT

  1. P013560E01
    The valve opening temperature is inscribed on the thermostat.

  1. P000436E01
    Immerse the thermostat in water, and then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. A085445E04
    Check the valve lift.

    Standard valve lift:
    10 mm (0.39 in.) or more at 95°C (203°F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F)).
    If it is not fully closed, replace the thermostat.

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →