DISASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE FRONT DIFFERENTIAL RING GEAR |
Put matchmarks on the front differential ring gear and differential case.

Remove the 10 bolts.

Using a plastic hammer, tap on the front differential ring gear to remove it from the case.

| 2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
Using SST, remove the front differential case front tapered roller bearing from the differential case.

- SST
- 09950-00020
09950-00030
09950-40011 (09957-04010)
09950-60010 (09951-00480)
Using SST, remove the front differential case front tapered roller bearing outer race.

- SST
- 09308-00010
| 3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
Using SST, remove the front differential case rear tapered roller bearing from the differential case.

- SST
- 09950-00020
09950-00030
09950-40011 (09955-04061, 09957-04010, 09958-04011)
09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021, 09955-05010)
09950-60010 (09951-00480)
09950-70010 (09951-07100)
Using SST, remove the front differential case rear tapered roller bearing outer race.

- SST
- 09308-00010
| 4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
Using a pin punch and hammer, remove the straight pin.

- NOTICE:
- Before removing the straight pin, unstake it with a pin punch.
| 5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT |
Remove the front No. 1 differential pinion shaft from the differential case.

| 6. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.

| 7. REMOVE TRANSAXLE HOUSING OIL SEAL |
Using SST and a hammer, remove the oil seal.

- SST
- 09950-70010
(09951-07200)
09950-60010 (09951-00630)
| 8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL |
Using SST and a hammer, remove the oil seal.

- SST
- 09950-70010
(09951-07100)
09608-10010
