2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT VANITY LIGHT ASSEMBLY

  1. E121462
    Apply battery voltage to the vanity light assembly connector.

  1. Check that the vanity light comes on.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Vanity light comes on

    If the result is not as specified, replace the bulb or vanity light assembly.

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →