2006-2011 Camry Aurion · Service Manual STEERING

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. DRAIN POWER STEERING FLUID

2. REMOVE V-RIBBED BELT

HINT:
Refer to the instructions for removal of the drive belt (Click here).


3. DISCONNECT NO. 1 FLUID RESERVOIR TO PUMP HOSE

  1. C133174E02
    Slide the clip and disconnect the No. 1 fluid reservoir to pump hose from the vane pump assembly.


4. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for LHD)

  1. C133175
    Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.

  1. Remove the bolt and separate the pressure feed tube clamp.

  1. Remove the gasket from the pressure feed tube assembly.


5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for RHD)

  1. C137089
    Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.

  1. Remove the gasket from the pressure feed tube assembly.


6. DISCONNECT POWER STEERING FLUID PRESSURE SWITCH CONNECTOR

  1. C133176
    Disconnect the power steering fluid pressure switch connector.


7. REMOVE VANE PUMP ASSEMBLY

  1. C133177E01
    Using SST, loosen bolt (A) and remove bolt (B), and then remove the vane pump assembly.
    SST
    09249-63010  

  1. C135238
    Remove the bolt from the vane pump assembly.

← COMPONENTS (from Oct 2006)REMOVAL (from Jun 2009) →