2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

  1. E128523
    Release the 2 claws and remove the No. 2 air duct sub-assembly as shown in the illustration.


2. REMOVE COOLER EXPANSION VALVE

  1. C129879
    Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.


3. REMOVE BLOWER ASSEMBLY

  1. E129996
    Remove the connector and clamp, and disconnect the wire harness.

  1. E129997
    Remove the 6 screws and then the blower assembly with the cooler evaporator sub-assembly.


4. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY

  1. E128525
    Release the 4 claws and remove the No. 6 heater to register duct assembly.


5. REMOVE DRAIN COOLER HOSE

  1. E128535
    Remove the drain cooler hose from the air conditioning radiator assembly.


6. REMOVE AIR OUTLET CONTROL SERVO MOTOR

  1. C129727
    Disconnect the 2 connectors and remove the air conditioner harness.

  1. C129728
    Remove the 3 screws and then remove the air outlet control servo motor.


7. REMOVE AIR MIX CONTROL SERVO MOTOR (for Automatic Air Conditioning System)

  1. C129729
    Remove the 2 screws and air mix control servo motor.


8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

  1. C129730
    Remove the screw and clamp.

  1. Release the 4 claws and remove the clamp.

  1. E128528
    Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly.

    NOTICE:
    Prepare a drain pan or cloth in case the cooling coolant leaks.


9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. C129878E02
    Remove the clamp and No. 1 cooler thermistor.

  1. C129880
    Remove the No. 1 cooler evaporator sub-assembly.

  1. C129881
    Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

← REMOVAL (from Jun 2009)REASSEMBLY (from Oct 2006) →