2006-2011 Camry Aurion · Service Manual ENGINE

ON-VEHICLE CLEANING

Removal / installation · Vehicles built from Oct 2006


1. INSPECT FINS BLOCKAGE

  1. A073603
    If the fins are clogged, wash them with water or a steam cleaner. Dry with compressed air.

    NOTICE:
    1. If the distance between the steam cleaner and the core is too close, the fins may become damaged. Keep the following injection distance.

      Standard:
      Injection Distance
      Injection Pressure
      300 mm (11.81 in.)
      2942 to 4903 kPa
      (30 to 50 kgf/cm2, 427 to 711 psi)
      500 mm (19.69 in.)
      4903 to 7845 kPa
      (50 to 80 kgf/cm2, 711 to 1138 psi)

    2. If the fins are bent, straighten them with a screwdriver or pliers.
    3. Never apply water directly onto the electronic components.

← ON-VEHICLE INSPECTION (from Oct 2006)REMOVAL (Oct 2006 – May 2009) →