REASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1.
INSTALL FUEL PRESSURE REGULATOR ASSEMBLY |
 |
- Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the fuel pressure regulator.
- Push in the fuel pressure regulator to the fuel filter.
| 2.
INSTALL FUEL PUMP |
 |
- Apply a light coat of gasoline or grease to the O-ring of the fuel pump.
Push in the fuel pump to the fuel filter.
| 3.
INSTALL FUEL PUMP HARNESS |
 |
- Connect the connector (*1).
Install the fuel pump harness (*2).
| 4.
INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY |
 |
- Connect the fuel pump connector (*1).
Install the fuel suction plate.
| 5.
INSTALL FUEL SENDER GAUGE ASSEMBLY |
 |
- Slide the fuel sender gauge to engage with the claw (*1).
Connect the fuel sender gauge connector (*2).
| 6.
INSTALL FUEL PUMP CUSHION RUBBER |
 |
- Install the fuel pump cushion rubber to the fuel pump.
| 7.
INSTALL NO. 2 FUEL SUCTION SUPPORT |
 |
- Install the No. 2 fuel suction support.