2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Wireless Door Lock Buzzer Circuit

Circuit diagnosis · Vehicles built from Jun 2006

DESCRIPTION

The main body ECU activates the wireless door lock buzzer when detecting a lock/unlock signal from the door control transmitter.

WIRING DIAGRAM

B113639E04

INSPECTION PROCEDURE


1. INSPECT WIRELESS DOOR LOCK BUZZER

  1. B144393E01
    Disconnect the A48 wireless door lock buzzer connector.

  1. Measure the resistance according to the value(s) in the table below.

    HINT:
    The buzzer activation circuit is built into the ECU, not into the buzzer itself. When battery voltage is applied directly to the buzzer, the buzzer will not sound.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A48-1 - A48-2
    Always
    Approx. 1 kΩ



NG
REPLACE WIRELESS DOOR LOCK BUZZER
OK


2. CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - WIRELESS DOOR LOCK BUZZER - BODY GROUND)

  1. B113633E03
    Disconnect the E9 main body ECU connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Symbol
    (Tester Connection)
    Condition
    Specified Condition
    BZR (E9-7) - A48-1
    Always
    Below 1 Ω
    BZR (E9-7) - Body ground
    Always
    10 kΩ or higher
    A48-1 - Body ground
    Always
    10 kΩ or higher
    A48-2 - Body ground
    Always
    Below 1 Ω



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE


← B1242 Wireless Door Lock Tuner Circuit Malfunction (from Jun 2009)PRECAUTION (from Oct 2006) →