2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT SEAT ASSEMBLY
  1. Place the front seat assembly in the vehicle and align the adjuster pin with the hole on the vehicle side.

  1. Connect the connector and clamp.

  1. Move the front seat assembly to the rearmost position by operating the slide handle.

    NOTICE:
    Check that the seat is locked.

  1. B166772
    Temporarily install the front seat track bracket with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide handle.

    NOTICE:
    Check that the seat is locked.

  1. B139102
    Temporarily install the rear seat track bracket with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide handle.

    NOTICE:
    Check that the seat is locked.

  1. Fully tighten the 2 bolts on the front seat track bracket in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide handle.

    NOTICE:
    Check that the seat is locked.

  1. Fully tighten the 2 bolts on the rear seat track bracket in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


2. INSTALL OUTER SEAT TRACK BRACKET COVER

  1. B148954
    Engage the 4 claws and install the front seat rear outer track bracket cover.


3. INSTALL INNER SEAT TRACK BRACKET COVER
  1. Engage the 4 claws and install the front seat rear inner track bracket cover.


4. INSTALL FRONT SEAT HEADREST ASSEMBLY

5. INSPECT SLIDE ADJUSTER LOCK

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. INSPECT SRS WARNING LIGHT
Inspect the SRS warning light. (Click here)
← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Oct 2006) →