2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY (for 2GR-FE)

  1. B142421
    Install the luggage door opening switch assembly with the 2 nuts.

  1. Connect the connector.


2. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY (for 2AZ-FE)

  1. w/o Rear View Monitor System:

    1. B212895
      Install the luggage door opening switch assembly with the 2 screws.

    2. Engage the 2 clamps.

  1. w/ Rear View Monitor System:

    1. B212894
      Install the luggage door opening switch assembly with the 2 screws.

    2. Engage the 2 clamps.

    3. Connect the connector.


3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY (for 2AZ-FE)

  1. B135462
    Engage the 2 clips and install the luggage compartment door outside garnish assembly.

  1. B135460
    Install the 3 nuts.


4. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (for 2AZ-FE)

  1. B136497
    Install the luggage compartment door lock cylinder assembly with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. B136496
    Connect the cable and connector.

  1. B136492
    Connect the rod.


5. INSTALL LUGGAGE COMPARTMENT DOOR COVER (for 2GR-FE)

  1. B135465
    Install the luggage compartment door cover with the 13 clips.


6. INSTALL LUGGAGE COMPARTMENT DOOR COVER (for 2AZ-FE)

  1. B135458
    Install the luggage compartment door cover with the 13 clips.

← INSTALLATION (Oct 2006 – May 2009)PRECAUTION (Jun 2006 – Sep 2006) →