2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE LUGGAGE COMPARTMENT DOOR COVER (for 2GR-FE)

  1. B135465
    Using a clip remover, remove the 13 clips and luggage compartment door cover.


2. REMOVE LUGGAGE COMPARTMENT DOOR COVER (for 2AZ-FE)

  1. B135458
    Using a clip remover, remove the 13 clips and luggage compartment door cover.


3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (for 2AZ-FE)

  1. B136491
    Disconnect the rod.

  1. B136496
    Disconnect the cable and connector.

  1. B136497
    Remove the 2 nuts and luggage compartment door lock cylinder assembly.


4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY (for 2AZ-FE)

  1. B135459E01
    Put protective tape around the luggage compartment door outside garnish assembly.

  1. B135460
    Remove the 3 nuts.

  1. B135461
    Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish assembly.


5. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (for 2GR-FE)
  1. Disconnect the connector.

  1. B142421
    Remove the 2 nuts and the luggage door opening switch assembly.


6. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (for 2AZ-FE)

  1. w/o Rear View Monitor System:

    1. B212895
      Disengage the 2 clamps.

    2. Remove the 2 screws and luggage door opening switch assembly.

  1. w/ Rear View Monitor System:

    1. B212894
      Disconnect the connector.

    2. Disengage the 2 clamps.

    3. Remove the 2 screws and luggage door opening switch assembly.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (Oct 2006 – May 2009) →