INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT EVAP VSV |
Check the VSV for an open circuit.

Measure the resistance.
- Standard resistance:
Tester Connection
Specified Condition
1 - 2
23 to 26 Ω at 20°C (68°F)
1 - Body ground
2 - Body ground
10 kΩ or higher
Check VSV operation.
Check that air does not flow from port E to port F.

Apply battery positive voltage across the terminals.

Check that air flows from port E to port F.
If the result is not as specified, replace the VSV assembly.
