2006-2011 Camry Aurion · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL AIR FUEL RATIO SENSOR

  1. A144642E02
    Using SST, install the 2 air fuel ratio sensors to the front pipe assembly.
    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }

    NOTICE:
    The torque shown above should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST (Click here).

  1. Connect the 2 air fuel ratio sensor connectors.

← INSPECTION (from Oct 2006)INSTALLATION (from Jun 2009) →