REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
|
 |
- Detach the 2 front hooks of the seat cushion from the vehicle body.
- NOTICE:
- Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
| 2.
REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
|
 |
- Detach the 2 front hooks of the seat cushion from the vehicle body.
- NOTICE:
- Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the seat cushion.
| 3.
REMOVE REAR SEAT HEADREST ASSEMBLY |
|
| 4.
REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Armrest) |
|
| 5.
REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
|
 |
- Remove the 3 rear seat belts from the 3 rear seat shoulder belt guides.
- Remove the 4 bolts and rear seatback assembly.
| 6.
REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
|
 |
- Remove the 2 bolts and separate type rear seatback assembly LH.
| 7.
REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type)
|
 |
- Remove the 2 bolts and separate type rear seatback assembly RH.
| 8.
REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
|
 |
- Remove the bolt and rear side seatback assembly LH.
| 9.
REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 10.
REMOVE REAR DOOR SCUFF PLATE LH
|
 |
- Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.
| 11.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
|
| 12.
REMOVE REAR DOOR SCUFF PLATE RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 13.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH |
|
| 14.
REMOVE NO. 1 SEAT BRACKET (for Fixed Seat Type) |
 |
Remove the 2 nuts and the No. 1 seat bracket.
| 15.
REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH |
 |
- Remove the bolt and the rear seat inner with center belt assembly RH.
| 16.
DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH |
 |
- Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly LH.
| 17.
REMOVE ROOF SIDE INNER GARNISH LH
|
 |
- Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.
| 18.
REMOVE ROOF SIDE INNER GARNISH RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 19.
DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH
|
 |
- Remove the bolt and disconnect the floor end of the rear seat outer belt assembly LH.
| 20.
DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH
|
 |
- Remove the bolt and disconnect the floor end of the rear seat outer belt assembly RH.
| 21.
REMOVE REAR SEAT SHOULDER BELT COVER |
 |
- Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt cover.
- HINT:
- Tape the screwdriver tip before use.
- Use the same procedure for the RH side and LH side.
| 22.
REMOVE REAR SEAT SHOULDER BELT HOLE COVER |
 |
- Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.
- HINT:
- Tape the screwdriver tip before use.
| 23.
REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) |
 |
- Disconnect the connector.
Disengage the 4 clips and the 5 claws.
Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly, then remove the package tray trim panel assembly.
| 24.
REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)
|
 |
- Disengage the 2 clips and raise the front portion of the package tray trim panel assembly.
Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly.
Remove the package tray trim panel assembly.
| 25.
REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH |
 |
- Remove the bolt and the rear seat inner with center belt assembly LH.