2006-2011 Camry Aurion · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

  1. B136575E01
    Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the rear seat cushion assembly.


2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

  1. B134699E01
    Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the seat cushion.


3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Armrest)

5. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

  1. B136576
    Remove the 3 rear seat belts from the 3 rear seat shoulder belt guides.

  1. B136577
    Remove the 4 bolts and rear seatback assembly.


6. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

  1. B136539
    Remove the 2 bolts and separate type rear seatback assembly LH.


7. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type)

  1. B134700
    Remove the 2 bolts and separate type rear seatback assembly RH.


8. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

  1. B136561
    Remove the bolt and rear side seatback assembly LH.


9. REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)

HINT:
Use the same procedure for the RH side and LH side.


10. REMOVE REAR DOOR SCUFF PLATE LH

  1. B132068
    Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.


11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

12. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure for the RH side and LH side.


13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

14. REMOVE NO. 1 SEAT BRACKET (for Fixed Seat Type)
  1. Remove the 2 nuts and the No. 1 seat bracket.


15. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

  1. B151316
    Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly LH.


16. REMOVE ROOF SIDE INNER GARNISH LH

  1. B132063
    Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.


17. REMOVE ROOF SIDE INNER GARNISH RH

HINT:
Use the same procedure for the RH side and LH side.


18. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH

  1. B147734
    Remove the bolt and disconnect the floor end of the rear seat outer belt assembly LH.


19. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

  1. B147735
    Remove the bolt and disconnect the floor end of the rear seat outer belt assembly RH.


20. REMOVE REAR SEAT SHOULDER BELT COVER

  1. B132011E01
    Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt cover.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedure for the RH side and LH side.


21. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

  1. B132013E02
    Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.

    HINT:
    Tape the screwdriver tip before use.


22. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

  1. B132022
    Disconnect the connector.

  1. Disengage the 4 clips and the 5 claws.

  1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly, then remove the package tray trim panel assembly.


23. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

  1. B149208
    Disengage the 2 clips and raise the front portion of the package tray trim panel assembly.

  1. Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly.

  1. Remove the package tray trim panel assembly.


24. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

  1. B132027
    Remove the 3 bolts and the 3 child restraint seat tether anchor brackets.

← COMPONENTS (from Oct 2006)REMOVAL (Oct 2006 – May 2009) →