REPLACEMENT
Removal / installation · Vehicles built from Jun 2006
- CAUTION:
- For safety reasons, wear gloves and eye protection.
- NOTICE:
- Pulling directly on the outer rear view mirror glass will result in serious damage to the motor assembly.
| 1. REMOVE OUTER REAR VIEW MIRROR GLASS |
Adjust the mirror glass to the fully inboard and upward position.

Insert a screwdriver with the tip taped between the mirror housing and the mirror glass as shown in the illustration.

- NOTICE:
- The screwdriver should be securely wedged up against the back of the mirror glass.
Twist the screwdriver to separate the mirror glass from the motor plate.

| 2. INSTALL OUTER REAR VIEW MIRROR GLASS |
Place a new outer rear view mirror glass over the motor plate. Ensure that the spring wire is positioned correctly in the guide track on the motor plate.
Cover the mirror glass with a piece of cloth and apply even pressure to engage the glass with the motor plate.
Adjust the mirror manually to check that the spring wire is correctly positioned. There should be a clicking sound during manual adjustment.
Check that the mirror can be adjusted using the outer mirror switch.
Adjust the mirror to the desired position.
