2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (for HID Headlight)
  1. Install a new headlight leveling motor base packing.


2. INSTALL HEADLIGHT LEVELING MOTOR (for HID Headlight)

  1. E131205
    Engage the tip of the headlight leveling motor with the reflector.

  1. E192593
    Turn the headlight leveling motor to install it.


3. INSTALL HEADLIGHT GASKET (for HID Headlight)
  1. Install a new headlight gasket.


4. INSTALL LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)

  1. E182837
    Connect the connector.

  1. E182836
    Install the headlight control ECU sub-assembly with the 4 screws.


5. INSTALL CLEARANCE LIGHT BULB
  1. Install the clearance light bulb to the clearance light socket.

  1. E182838
    Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


6. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.

  1. E182839
    Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


7. INSTALL NO. 2 HEADLIGHT BULB (for Halogen Headlight)

  1. E182840
    Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

    NOTICE:
    Do not touch the bulb glass.


8. INSTALL DISCHARGE HEADLIGHT BULB (for HID Headlight)

  1. E182843E01
    Lock the set spring to install the discharge headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.

  1. E182844
    Turn the light control ECU socket in the direction indicated by the arrow shown in the illustration to connect it.


9. INSTALL NO. 1 HEADLIGHT BULB (for Halogen Headlight)

  1. E182845
    Install the No. 1 headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.

  1. Connect the connector.


10. INSTALL NO. 1 HEADLIGHT BULB (for HID Headlight)

  1. E182846
    Install the No. 1 headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.

  1. Connect the connector.


11. INSTALL HEADLIGHT BACK COVER (for Halogen Headlight)

  1. E182848
    Install the headlight back cover as shown in the illustration.


12. INSTALL HEADLIGHT BACK COVER GASKET (for HID Headlight)
  1. Install a new headlight back cover gasket.


13. INSTALL HEADLIGHT BACK COVER (for HID Headlight)

  1. E182850
    Tighten the 2 screws.

  1. Lock the set spring to install the headlight back cover as shown in the illustration.

← REASSEMBLY (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →