2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL REAR LIGHT ASSEMBLY

  1. E192205
    Engage the pin and install the rear light assembly.

  1. Install the 3 nuts.

    Torque:
    3.6 N*m{ 37 kgf*cm , 32 in.*lbf }

  1. Connect the connector.


2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

  1. B135458
    Install the luggage compartment door cover with the 13 clips.


3. INSTALL REAR COMBINATION LIGHT ASSEMBLY

  1. E192200
    Engage the clip and install the rear combination light assembly.

  1. Install the 3 nuts.

    Torque:
    3.6 N*m{ 37 kgf*cm , 32 in.*lbf }

  1. E192198
    Connect the 2 connectors and clamp.


4. INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler)

  1. B137214
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws and 2 clips.

  1. B137213
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


5. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/o Rear Lower Spoiler)

  1. B137209
    Install the rear quarter panel mudguard sub-assembly LH with the 3 screws.


6. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/o Rear Lower Spoiler)

HINT:
Use the same procedure for the RH and LH sides.


7. INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler)

  1. B140154
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws.

  1. B147905
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


8. INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler)

  1. B138885E01
    Install the rear floor board with the 3 nuts, 2 clips and 4 screws.


9. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Clearance Sonar System)

  1. B136855
    Install the luggage compartment inner trim cover RH with the 2 clips.


10. INSTALL REAR FLOOR FINISH PLATE

  1. B136852
    Engage the 7 clips and install the rear floor finish plate.


11. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  1. B136879
    Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.


12. INSTALL SPARE WHEEL COVER ASSEMBLY

13. INSTALL SPARE WHEEL COVER CLAMP

14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
← INSTALLATION (Jun 2006 – May 2009)COMPONENTS (Oct 2006 – May 2009) →