2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built Jun 2006 – May 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. REMOVE REAR COMBINATION LIGHT GASKET

  1. E128217
    Remove the rear combination light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.


2. REMOVE TAIL AND STOP LIGHT BULB

  1. E128220
    Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and disconnect them as a unit.

  1. Remove the tail and stop light bulb from the tail and stop light socket.


3. REMOVE REAR TURN SIGNAL LIGHT BULB

  1. E128218
    Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and disconnect them as a unit.

  1. Remove the rear turn signal light bulb from the rear turn signal light socket.


4. REMOVE REAR BUMPER RETAINER UPPER

  1. E130242
    Disengage the claw and remove the rear bumper retainer upper.


5. REMOVE BACK UP LIGHT BULB

  1. E130212
    Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.

  1. Remove the back up light bulb from the rear light socket and wire.


6. REMOVE TAIL LIGHT BULB

  1. E130214
    Turn the tail light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.

  1. Remove the tail light bulb from the rear light socket and wire.


7. REMOVE REAR LIGHT GASKET

  1. E128212
    Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.

← REMOVAL (from Jun 2009)DISASSEMBLY (from Jun 2009) →