REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE ENGINE UNDER COVER RH |
| 2. REMOVE ENGINE UNDER COVER LH |
| 3. DRAIN ENGINE COOLANT |
- NOTICE:
- Do not remove the radiator cap sub-assembly while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Remove the radiator cap sub-assembly from the radiator assembly.
Loosen the radiator drain cock plug and cylinder block drain cock plug, then drain the coolant.


- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
| 4. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil drain plug and drain the oil into a container.
| 5. REMOVE OIL FILTER SUB-ASSEMBLY |
Using SST, remove the oil filter.

- SST
- 09228-06501
| 6. REMOVE ENGINE OIL COOLER |
Disconnect the 2 oil cooler hoses from the oil cooler.

Remove the oil cooler union bolt, plate washer, nut, oil cooler and O-ring.
