INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1.
INSTALL TURN SIGNAL FLASHER ASSEMBLY |
 |
- Install the clamp and the turn signal flasher assembly.
Connect the connector.
| 2.
INSTALL COMBINATION METER ASSEMBLY
|
 |
Connect the connector.
- Install the combination meter assembly as shown in the illustration.
- Install the 4 screws.
| 3.
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
 |
- Engage the guide and the 4 claws.
Install the instrument cluster finish panel sub-assembly with the 2 clips.
| 4.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
|
 |
- Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.
| 5.
INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)
|
 |
Connect each connector.
- Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.
| 6.
INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)
|
 |
Connect each connector.
- Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.
| 7.
INSTALL STEERING COLUMN COVER
|
 |
- Engage the claw and install the upper steering column cover.
- Engage the 2 claws.
Install the lower steering column cover with the 2 screws.
-
Torque:
- 2.0 N*m{
20 kgf*cm
, 18 in.*lbf
}
| 8.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
|
 |
Install the air hose and connect the connector.
- Engage the claw and the 4 clips.
Connect the hood lock control cable assembly.
Engage the 2 claws and connect the connector.
Install the lower No. 1 instrument panel finish panel with the screw and bolt.
| 9.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Engage the 2 clips.
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 10.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Engage the 7 claws and 3 clips, then install the front door scuff plate LH.