63-46 Scratched / Reversed Disc
Diagnostic trouble codes · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009
DESCRIPTION
DTC No.
|
DTC Detection Condition
|
Trouble Area
|
63-46
|
Scratches or dirt is found on CD surface or CD is set upside down.
|
- CD
- Navigation receiver assembly
|
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. CHECK THAT CD IS INSERTED PROPERLY |
 |
Check that the CD is not inserted upside down.
- OK:
- CD is properly inserted.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK DISC |
 |
- Check that the disc is not deformed or cracked.
- OK:
- No deformations or cracks on the disc.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. DISC CLEANING |
 |
- Disc cleaning
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
| NEXT |
|
 |
|
| 4. CLEAR DTC |
 |
Clear the DTCs (Click here).
| NEXT |
|
 |
|
| 5. RECHECK FOR DTC |
 |
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
OK |
 |
|
|
|
| NG |
|
 |
|
| 6. REPLACE DISC WITH ANOTHER AND RECHECK |
 |
Replace the disc with another and recheck.
Replace the disc with another normal one.
Clear the DTCs (Click here).
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
NG |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|
|
| OK |
|
 |
|
|