2006-2011 Camry Aurion · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT CRUISE CONTROL MAIN SWITCH

  1. Remove the cruise control main switch.

    E106137E06

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    A-1 (CCS) - A-3 (ECC)
    Neutral
    10 kΩ or higher
    A-1 (CCS) - A-3 (ECC)
    + (ACCEL)/RES (RESUME)
    216 to 264 Ω
    A-1 (CCS) - A-3 (ECC)
    - (COAST)/SET
    567 to 693 Ω
    A-1 (CCS) - A-3 (ECC)
    CANCEL
    1,386 to 1,694 Ω
    A-1 (CCS) - A-3 (ECC)
    Main Switch on
    Below 1 Ω

    If the result is not as specified, replace the cruise control main switch.

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →