2006-2011 Camry Aurion · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT CLUTCH SWITCH ASSEMBLY

  1. E133093E01
    Remove the clutch switch.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Switch pin free (Clutch pedal depressed)
    10 kΩ or higher
    Switch pin pushed in (Clutch pedal released)
    Below 1 Ω

    If the result is not as specified, replace the clutch switch.

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →