2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT PRESSURE SENSOR
  1. Install the manifold gauge set (Click here).

  1. E107326E08
    Connect the three 1.5 V dry cell batteries' positive (+) lead to terminal 3 and the negative (-) lead to terminal 1. Then connect the voltmeter's positive (+) lead to terminal 2 and the negative (-) lead to terminal 1. Measure the voltage.

    OK:
    The voltage changes according to refrigerant pressure, as shown in the graph.

    If the voltage is not as specified, replace the pressure sensor.

← INSTALLATION (from Jun 2009)COMPONENTS (Jun 2006 – Sep 2006) →