2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

CD Sound Skips

Circuit diagnosis · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK CD

  1. I100152
    Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD



NG
CD IS FAULTY
OK


2. CHECK CD

  1. I100201E04
    Check the CD.

    OK:
    The CD is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN CD
OK


3. CHECK OPERATION WITH ANOTHER CD
  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



NG
Go to step 4
OK

CD WAS FAULTY

4. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      The navigation receiver assembly is properly installed.

      Result:
      Result
      Proceed to
      NG
      A
      OK
      (for 2GR-FE RHD)
      B
      OK
      (except 2GR-FE RHD)
      C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (for 2GR-FE RHD) (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (except 2GR-FE RHD) (Click here)
A

REINSTALL NAVIGATION RECEIVER ASSEMBLY


← CD Sound Skips (Jun 2006 – May 2009)Radio Broadcast cannot be Received or Poor Reception (Jun 2006 – Sep 2006) →