REASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1.
INSTALL PARKING BRAKE SWITCH ASSEMBLY |
 |
- Install the parking brake switch assembly with the screw.
| 2.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY |
 |
Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.
- Temporarily tighten the lock nut and the No. 1 wire adjusting nut.
- NOTICE:
- Fully tighten the lock nut when adjusting the parking brake lever travel.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
- Bend the parking brake lever claw.