REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
|
 |
- Remove the nut and the front wiper arm and blade assembly LH.
| 3.
REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
|
 |
- Remove the nut and the front wiper arm and blade assembly RH.
| 4.
REMOVE FRONT FENDER TO COWL SIDE SEAL LH
|
 |
- Disengage the claw and remove the front fender to cowl side seal LH.
| 5.
REMOVE FRONT FENDER TO COWL SIDE SEAL RH
|
 |
- Disengage the claw and remove the front fender to cowl side seal RH.
| 6.
REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
|
 |
- Remove the 2 clips.
Disengage the 4 claws and remove the cowl top ventilator louver sub-assembly.
| 7.
REMOVE WINDSHIELD WIPER MOTOR AND LINK
|
 |
- Disconnect the connector.
- Remove the 4 bolts and the windshield wiper motor and link assembly.
| 8.
REMOVE COWL TOP OUTER PANEL SUB-ASSEMBLY
|
 |
- Remove the 4 bolts, 4 nuts and cowl top panel outer sub-assembly.
| 9.
REMOVE ECM |
 |
- Remove the 3 nuts.
- Disconnect the 2 connectors and remove the ECM.
- Remove the 4 screws and 2 ECM brackets.