2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)

  1. B161416
    Remove the 7 clips and cool air intake duct seal.


2. REMOVE FRONT BUMPER ASSEMBLY (for 2AZ-FE)
without Fog Light: (Click here)
with Fog Light: (Click here)

3. REMOVE FRONT BUMPER ASSEMBLY (for 2GR-FE)
without Fog Light: (Click here)
with Fog Light: (Click here)
with Clearance Sonar System: (Click here)
with Headlight Cleaner System: (Click here)

4. DRAIN WASHER FLUID

  1. E128826
    Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.


5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

  1. E128827
    Disconnect the connector.

  1. Remove the windshield washer motor and pump assembly.


6. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)

  1. E128838
    Disconnect the connector.

  1. Remove the headlight cleaner motor and pump assembly.

← REMOVAL (Jun 2006 – Sep 2006)REMOVAL (from Jun 2009) →