2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

ADJUSTMENT

Removal / installation · Vehicles built from Jun 2006


1. ADJUST WASHER NOZZLE SUB-ASSEMBLY

  1. E128830E01
    Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

    NOTICE:
    Be careful not to damage the windshield.

    HINT:
    Tape the screwdriver tip before use.

  1. E128831
    Disconnect the washer nozzle sub-assembly from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.

  1. Select a washer nozzle sub-assembly so that the washer fluid spray area is within the standard.

    E133754E02

  1. E128831
    Connect the selected washer nozzle sub-assembly to the washer hose.

  1. E135585
    Engage the 2 claws and install the washer nozzle sub-assembly.

← ON-VEHICLE INSPECTION (from Jun 2006)COMPONENTS (from Oct 2006) →