REMOVAL
Removal / installation · Vehicles built from Jun 2009
| 1.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
| 2.
REMOVE UPPER CONSOLE PANEL FRONT GARNISH
|
 |
- Apply protective tape to the area shown in the illustration.
- Using a moulding remover, disengage the 3 claws as shown in the illustration.
- Using a moulding remover, disengage the 3 claws and remove the upper console panel front garnish as shown in the illustration.
Disconnect each connector.
| 3.
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
- Apply protective tape to the area shown in the illustration.
- Using a moulding remover, disengage the 2 claws as shown in the illustration.
- Apply protective tape to the area shown in the illustration.
- Using a moulding remover, disengage the 2 claws as shown in the illustration.
- Disengage the 6 claws and remove the upper console panel sub-assembly as shown in the illustration.
Disconnect the connector.
| 4.
REMOVE STEREO JACK ADAPTER ASSEMBLY |
 |
- Disengage the 2 claws and remove the stereo jack adapter assembly.