2006-2011 Camry Aurion · Service Manual SECURITIES

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL ENGINE HOOD COURTESY SWITCH (for 2AZ-FE RHD)

  1. B142453
    Install the engine hood courtesy switch with the 2 screws.


2. INSTALL ENGINE HOOD COURTESY SWITCH (for 2GR-FE RHD)

  1. B164910
    Install the engine hood courtesy switch with the 2 screws.


3. INSTALL HOOD LOCK TENSION SPRING B (for 2AZ-FE RHD)

  1. B142452E01
    Install the tension spring B.


4. INSTALL HOOD LOCK TENSION SPRING B (for 2GR-FE RHD)

  1. B164909E01
    Install the tension spring B.


5. INSTALL HOOD LOCK TENSION SPRING A (for 2AZ-FE RHD)

  1. B142451E01
    Install the tension spring A.


6. INSTALL HOOD LOCK TENSION SPRING A (for 2GR-FE RHD)

  1. B164908E01
    Install the tension spring A.


7. INSTALL HOOD LOCK ASSEMBLY (for 2AZ-FE RHD)

  1. B149056
    Apply MP grease to the sliding areas of the lock.

  1. B149053
    Connect the hood lock control cable.

  1. B149052
    Install the hood lock assembly with the 3 bolts.

    Torque:
    7.5 N*m{ 77 kgf*cm , 66 in.*lbf }

  1. Connect the connector.


8. INSTALL HOOD LOCK ASSEMBLY (for 2GR-FE RHD)

  1. B155585
    Apply MP grease to the sliding areas of the lock.

  1. B155584
    Connect the hood lock control cable.

  1. B155583
    Install the hood lock assembly with the 3 bolts.

    Torque:
    7.5 N*m{ 77 kgf*cm , 66 in.*lbf }

  1. Connect the connector.


9. INSTALL LOW PITCHED HORN ASSEMBLY (for 2AZ-FE)

  1. E127997
    Install the low pitched horn assembly with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the connector.


10. INSTALL LOW PITCHED HORN ASSEMBLY (for 2GR-FE)

  1. E136739
    Install the low pitched horn assembly with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the connector.


11. INSTALL FRONT BUMPER ASSEMBLY (for 2AZ-FE)
  1. Install the front bumper assembly (Click here).


12. INSTALL FRONT BUMPER ASSEMBLY (for 2GR-FE)
  1. Install the front bumper assembly (Click here).

← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Jun 2006) →