2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE LH

  1. B132068
    Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.


3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

  1. B132116E01
    Remove the cowl side trim clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.


4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  1. B147264E01
    Remove the bolt <A> and the screw <B>.

  1. Disengage the 2 claws and the DLC3.

  1. Disconnect the hood lock control cable assembly.

  1. Disengage the claw and the 4 clips.

  1. Remove the air hose, disconnect the connector, and then remove the lower No. 1 instrument panel finish panel.


5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

HINT:
  1. w/o Smart Entry and Start System: (Click here).
  2. w/ Smart Entry and Start System: (Click here).


6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  1. C147376
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


7. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226064
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226063
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


9. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

HINT:
  1. for LHD: (Click here).
  2. for RHD: (Click here).


10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY

HINT:
  1. for LHD: (Click here)
  2. for RHD: (Click here)


11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. B133997E01
    Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


12. REMOVE CONSOLE BOX POCKET
  1. Remove the console box pocket.


13. REMOVE CONSOLE BOX CARPET

  1. B134004
    Remove the console box carpet.


14. REMOVE CONSOLE BOX ASSEMBLY

  1. B134002E01
    Remove the 2 screws <F>.

  1. B149935E03
    Disengage the clamp.

  1. Remove the 2 bolts <G> and the console box assembly.


15. REMOVE NO. 2 CONSOLE BOX INSERT FRONT

  1. B134005E01
    Remove the 3 screws <F>.

  1. Disengage the clip and remove the No. 2 console box insert front.


16. REMOVE NO. 1 CONSOLE BOX INSERT FRONT

  1. B134006E01
    Remove the 3 screws <F>.

  1. Disengage the clip and remove the No. 1 console box insert front.


17. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
  1. Disconnect the end of the transmission control cable assembly from the shift lever assembly.

  1. C135015
    Disconnect the transmission control cable assembly from the shift lever assembly.


18. REMOVE SHIFT LEVER ASSEMBLY

  1. C135016
    Disconnect the shift lock control ECU connector and transmission control switch wire connector.

  1. C135017
    Remove the 4 bolts and shift lever assembly.

← REMOVAL (Oct 2006 – May 2009)DISASSEMBLY (from Jun 2006) →