INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL TRANSPONDER KEY AMPLIFIER |
Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into position.
Push the transponder key amplifier to install it to the upper bracket.

- NOTICE:
- Do not push the amplifier with excessive force.
| 2. INSTALL STEERING COLUMN COVER |
Engage the claw and install the upper steering column cover.

Engage the 2 claws and install the lower steering column cover.
Install the steering column cover with the 2 screws <D>.
- Torque:
- 2.0 N*m{ 20 kgf*cm , 18 in.*lbf }
| 3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL |
Install the air hose and connect the connector.
Engage the claw and the 4 clips.

Connect the hood lock control cable assembly.
Engage the 2 claws and connect the connector.
Install the lower No. 1 instrument panel finish panel with the screw and bolt.
| 4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
Engage the 2 clips.

Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH |
Engage the 7 claws and 3 clips, then install the front door scuff plate LH.

