2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL POWER SEAT SWITCH

  1. B149586
    Connect the connector.

  1. Install the power seat switch with the 3 screws.


2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B134673
    Connect the connector.

  1. Engage the 2 claws.

  1. Install the front seat cushion shield assembly with the 5 screws.

  1. B146651
    Install the 2 rubber bands on the backside of the front seatback board sub-assembly.


3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B149597
    Install the slide and vertical power seat switch knob.


4. INSTALL RECLINING POWER SEAT SWITCH KNOB

  1. B149596
    Install the reclining power seat switch knob.


5. INSTALL FRONT SEAT ASSEMBLY
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. B149590
    Temporarily install the front side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B139102
    Temporarily install the rear side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


6. INSTALL OUTER SEAT TRACK BRACKET COVER

  1. B149587E01
    Slide the outer seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the seat track cover to engage claw B.


7. INSTALL INNER SEAT TRACK BRACKET COVER

  1. B149588E01
    Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the inner seat track bracket cover to engage claw B.


8. INSPECT SRS WARNING LIGHT (w/ Airbag System)
Inspect the SRS warning light. (Click here)

9. INSPECT FRONT SEAT ASSEMBLY
  1. Inspect the power seat operation.

← INSPECTION (from Jun 2006)INSTALLATION (Oct 2006 – May 2009) →