2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE FRONT SEAT HEADREST ASSEMBLY (for LHD)

2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for RHD)

3. REMOVE OUTER SEAT TRACK BRACKET COVER (for LHD)
  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B149587
    Using a screwdriver, detach the 4 claws and remove the outer seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE OUTER SEAT TRACK BRACKET COVER (for RHD)
  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B147681
    Using a screwdriver, disengage the 4 claws and remove the front seat rear outer track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE INNER SEAT TRACK BRACKET COVER (for LHD)

  1. B149588
    Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.


6. REMOVE INNER SEAT TRACK BRACKET COVER (for RHD)
  1. Using a screwdriver, disengage the 4 claws and remove the front seat rear inner track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE FRONT SEAT ASSEMBLY (for LHD)
  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B149590
    Remove the 2 bolts on the front seat track bracket.

  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B139102
    Remove the 2 bolts on the rear seat track bracket.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

  1. Disconnect the connectors under the seat. Then remove the front seat assembly.


8. REMOVE FRONT SEAT ASSEMBLY (for RHD)
  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B147683
    Remove the 2 bolts on the front seat track bracket.

  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B147684
    Remove the 2 bolts on the rear seat track bracket.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

  1. Disconnect the connectors under the seat. Then remove the front seat assembly.


9. REMOVE RECLINING POWER SEAT SWITCH KNOB (for LHD)

  1. B149584E01
    Using a screwdriver, detach the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


10. REMOVE RECLINING POWER SEAT SWITCH KNOB (for RHD)

  1. B147696E01
    Using a screwdriver, detach the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


11. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for LHD)

  1. B149585E01
    Using a screwdriver, detach the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


12. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for RHD)

  1. B147697E01
    Using a screwdriver, detach the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


13. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY (for LHD)

  1. B146651
    Disconnect the 2 hooks.

  1. B149573
    Remove the 5 screws.

  1. Disengage the 2 claws and separate the front seat cushion assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


14. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY (for RHD)

  1. B147624
    Disengage the 2 hooks.

  1. B147698
    Remove the 5 screws.

  1. Disengage the 2 claws and separate the front seat cushion shield assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


15. REMOVE FRONT POWER SEAT LUMBAR SWITCH (for LHD)

  1. B146654
    Remove the 2 screws and front power seat lumbar switch.


16. REMOVE FRONT POWER SEAT LUMBAR SWITCH (for RHD)

  1. B165270
    Remove the 2 screws and front power seat lumbar switch.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (from Oct 2006) →