REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE AIR CLEANER INLET ASSEMBLY
|
 |
- Remove the 2 bolts, clamp and air cleaner inlet.
| 3.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
- Disconnect the No. 2 ventilation hose from the air cleaner hose.
- Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
- Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 4.
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
|
 |
- Disconnect the hose clamp.
Remove the 3 bolts and air cleaner case.
| 5.
REMOVE STARTER ASSEMBLY (for Manual Transaxle) |
 |
- Disconnect the terminal 50 connector from the starter assembly.
Remove the nut and disconnect the wire harness from terminal 30.
- Remove the 3 bolts, clutch flexible hose bracket and starter assembly.
| 6.
REMOVE STARTER ASSEMBLY (for Automatic Transaxle) |
 |
- Disconnect the terminal 50 connector from the starter assembly.
Remove the nut and disconnect the wire harness from terminal 30.
- Remove the 2 bolts and starter assembly.