2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

  1. E145769
    Install the windshield wiper relay assembly with the nut.

  1. Connect the connector.


2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for 2AZ-FE RHD)

  1. B133992E01
    Engage the 3 claws and 3 clips.

  1. Install the 4 screws <B>.

  1. Install the lower instrument panel sub-assembly with the bolt <A>.


3. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY (for 2AZ-FE RHD)

  1. B133989E01
    Engage the 4 claws and 2 guides, and install the instrument panel No. 2 under cover sub-assembly.


4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B158922E01
    Engage the 3 claws and 3 clips.

  1. Install the screw <F> or <N>.

  1. Install the 3 screws <F>.

  1. Install the lower instrument panel sub-assembly with the bolt <D>.


5. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B158969E01
    Engage the 4 claws and 2 guides and install the instrument panel No. 2 under cover sub-assembly.


6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

  1. B132116E01
    Engage the 2 clips.

  1. Install the cowl side trim sub-assembly LH with the cowl side trim clip.


7. INSTALL FRONT DOOR SCUFF PLATE LH

  1. B132067
    Engage the 7 claws and 3 clips, then install the front door scuff plate LH.

← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Jun 2006) →