INSTALLATION
Removal / installation · Vehicles built from Jun 2009
| 1. INSTALL STEREO JACK ADAPTER ASSEMBLY |
Engage the 2 claws and install the stereo jack adapter assembly.

| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
Engage the 4 claws.

Install the upper console panel sub-assembly with the 2 screws <F>.
| 3. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Connect the connector.

Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 4. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

| 5. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

| 6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD) |
Engage the 6 claws and the 3 clips to install the position indicator housing assembly.

| 7. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD) |
Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.

| 8. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) |
Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.

| 9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.

| 10. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.

| 11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Install the shift lever knob sub-assembly.

| 12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Install the shift lever knob sub-assembly.

| 13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Install the shift lever knob sub-assembly.

