INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type) |
 |
- Install the radio receiver assembly as shown in the illustration.
| 2.
INSTALL RADIO NO. 2 BRACKET (for Radio Receiver Type) |
 |
- Install the radio No. 2 bracket with the 3 bolts and 2 screws.
| 3.
INSTALL RADIO NO. 1 BRACKET (for Radio Receiver Type) |
 |
- Install the radio No. 1 bracket with the 3 bolts and 2 screws.
| 4.
INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (for Radio Receiver Type) |
 |
- Connect each connector.
Engage the 4 clips.
Install the radio receiver with heater control panel assembly with the 4 bolts.
| 5.
INSTALL RADIO AND CASSETTE TAPE ASSEMBLY (w/o CD Player) |
|
| 6.
INSTALL RADIO NO. 2 BRACKET (w/o CD Player) |
 |
- Install the radio No. 2 bracket and radio receiver panel with the 2 bolts and 3 screws.
| 7.
INSTALL RADIO NO. 1 BRACKET (w/o CD Player) |
 |
- Install the radio No. 1 bracket and radio receiver panel with the 2 bolts and 3 screws.
| 8.
INSTALL RADIO AND CASSETTE TAPE WITH HEATER CONTROL PANEL ASSEMBLY (w/o CD Player) |
 |
- Connect each connector.
Engage the 6 clips.
Install the radio and cassette tape with heater control panel assembly with the 4 bolts.
| 9.
INSTALL RADIO RECEIVER ASSEMBLY (for Radio and Display Type) |
|
| 10.
INSTALL RADIO NO. 2 BRACKET (for Radio and Display Type) |
 |
- Install the radio No. 2 bracket and radio receiver panel with the 4 bolts and 2 screws.
| 11.
INSTALL RADIO NO. 1 BRACKET (for Radio and Display Type) |
 |
- Install the radio No. 1 bracket and radio receiver panel with the 4 bolts and 2 screws.
| 12.
INSTALL RADIO AND DISPLAY WITH HEATER CONTROL PANEL ASSEMBLY (for Radio and Display Type) |
 |
- Connect each connector.
Engage the 6 clips.
Install the radio and display with heater control panel assembly with the 4 bolts.
| 13.
INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
|
 |
Connect the connector.
- Engage the 7 clips and install the instrument panel No. 2 register assembly.
| 14.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
Connect each connector.
- Engage the 4 claws.
Install the upper console panel sub-assembly with the 2 screws <F>.
| 15.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Connect the connector.
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 16.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 17.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 18.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Engage the 6 claws and the 3 clips to install the position indicator housing assembly.
| 19.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.
| 20.
INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)
|
 |
- Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.
| 21.
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 22.
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 23.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Install the shift lever knob sub-assembly.
| 24.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Install the shift lever knob sub-assembly.
| 25.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Install the shift lever knob sub-assembly.