INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. INSTALL NAVIGATION RECEIVER ASSEMBLY |
Install the navigation receiver assembly as shown in the illustration.

| 2. INSTALL RADIO NO. 2 BRACKET |
Install the radio No. 2 bracket with the 3 bolts and 2 screws.

| 3. INSTALL RADIO NO. 1 BRACKET |
Install the radio No. 1 bracket with the 3 bolts and 2 screws.

| 4. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY |
Connect each connector.
Engage the 4 clips.

Install the navigation receiver with heater control panel assembly with the 4 bolts.
| 5. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY |
Connect the connector.
Engage the 7 clips and install the instrument panel No. 2 register assembly.

| 6. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY |
Connect each connector.
Engage the 2 claws and 2 clips.

Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.
| 7. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

| 8. INSTALL POSITION INDICATOR HOUSING ASSEMBLY |
Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.

| 9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.

| 10. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.

| 11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
Install the shift lever knob sub-assembly.

| 12. INSERT MAP DISC |
