INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL NAVIGATION RECEIVER ASSEMBLY |
 |
- Install the navigation receiver assembly as shown in the illustration.
| 2.
INSTALL RADIO NO. 2 BRACKET |
 |
- Install the radio No. 2 bracket with the 3 bolts and 2 screws.
| 3.
INSTALL RADIO NO. 1 BRACKET |
 |
- Install the radio No. 1 bracket with the 3 bolts and 2 screws.
| 4.
INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY |
 |
Connect each connector.
- Engage the 4 clips.
Install the navigation receiver with heater control panel assembly with the 4 bolts.
| 5.
INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
|
 |
Connect the connector.
- Engage the 7 clips and install the instrument panel No. 2 register assembly.
| 6.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
Connect each connector.
- Engage the 4 claws.
Install the upper console panel sub-assembly with the 2 screws <F>.
| 7.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 8.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY
|
 |
- Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.
| 9.
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 10.
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 11.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Install the shift lever knob sub-assembly.