INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL CONSOLE BOX ASSEMBLY |
 |
- Install the 2 screws.
- Install the console box assembly with the 2 bolts.
Engage the clamp.
| 2.
INSTALL CONSOLE BOX CARPET
|
 |
- Install the console box carpet.
| 3.
INSTALL CONSOLE BOX POCKET
|
 |
Install the console box pocket.
| 4.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Connect the connector.
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 5.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 6.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 7.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Engage the 6 claws and the 3 clips to install the position indicator housing assembly.
| 8.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.
| 9.
INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)
|
 |
- Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.
| 10.
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 11.
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 12.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)
|
 |
- Install the shift lever knob sub-assembly.
| 13.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)
|
 |
- Install the shift lever knob sub-assembly.
| 14.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Install the shift lever knob sub-assembly.