REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

| 4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

| 5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

| 6. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD) |
Disengage the 6 claws and the 3 clips, and then remove the position indicator housing assembly.

| 7. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD) |
Open the lid of the upper console panel.

Apply protective tape to the area shown in the illustration.
Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the position indicator housing assembly as shown in the illustration.

| 8. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) |
Open the lid of the upper console panel.

Apply protective tape to the area shown in the illustration.
Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

| 9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD) |
Disengage the 3 claws and the 5 clips.

Disconnect the connector and remove the upper console rear panel sub-assembly.
| 10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD) |
Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.

| 11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) |
Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.

| 12. REMOVE CONSOLE BOX POCKET |
Remove the console box pocket.
| 13. REMOVE CONSOLE BOX CARPET |
Remove the console box carpet.

| 14. REMOVE CONSOLE BOX ASSEMBLY |
Remove the 2 screws.

Disengage the clamp.

Remove the 2 bolts and the console box assembly.
