2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B226062
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B232854
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  1. B232855
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226063
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226064
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


6. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle LHD)

  1. B226065
    Disengage the 6 claws and the 3 clips, and then remove the position indicator housing assembly.


7. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle RHD)

  1. B232856E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B232857
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the position indicator housing assembly as shown in the illustration.


8. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

  1. B137274E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B137275
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.


9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle LHD)

  1. B226097
    Disengage the 3 claws and the 5 clips.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.


10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle RHD)

  1. B137277
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  1. B137277
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


12. REMOVE CONSOLE BOX POCKET
  1. Remove the console box pocket.


13. REMOVE CONSOLE BOX CARPET

  1. B134004
    Remove the console box carpet.


14. REMOVE CONSOLE BOX ASSEMBLY

  1. B134002
    Remove the 2 screws.

  1. B149935E02
    Disengage the clamp.

  1. Remove the 2 bolts and the console box assembly.

← REMOVAL (Oct 2006 – May 2009)DISASSEMBLY (from Oct 2006) →