2006-2011 Camry Aurion · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


INSPECT STOP LIGHT SWITCH

  1. A167698E10
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Switch is not pushed
    Below 1 Ω
    3 - 4
    Switch is not pushed
    10 kΩ or higher
    1 - 2
    Switch is pushed
    10 kΩ or higher
    3 - 4
    Switch is pushed
    Below 1 Ω

    If the measurement result is not normal, replace the stop light switch.

← INSPECTION (Jun 2006 – May 2009)INSTALLATION (Jun 2006 – Sep 2006) →