INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL ROOM TEMPERATURE SENSOR |
Engage the claw to install the sensor.

Connect the connector and attach the air hose.
| 2. INSTALL LOWER NO.1 INSTRUMENT PANEL FINISH PANEL |
Install the air hose and connect each connector.

Engage the claw and the 4 clips.
Engage the 2 claws and the DLC3.
Install the lower No. 1 instrument panel finish panel with the screw <F> and bolt <D>.
| 3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 4. INSTALL FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
