2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. REMOVE FRONT DIFFERENTIAL RING GEAR

  1. C138531E01
    Put matchmarks on the front differential ring gear and differential case.

  1. C138532
    Remove the 12 bolts.

  1. C138533
    Using a plastic hammer, tap on the front differential ring gear to remove it from the case.


2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

  1. C138534E01
    Using SST, remove the front differential case front tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)

  1. C138537E01
    Using SST, remove the front differential case front tapered roller bearing outer race and shim from the transaxle housing.
    SST
    09308-00010  


3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

  1. C138535E01
    Using SST, remove the front differential case rear tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)

  1. C138536E01
    Using SST, remove the front differential case rear tapered roller bearing outer race from the transaxle case.
    SST
    09308-00010  


4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

  1. C138710
    Using a pin punch (3 mm) and hammer, remove the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.


5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

  1. C138706
    Remove the front No. 1 differential pinion shaft from the differential case.


6. REMOVE DIFFERENTIAL SIDE GEAR

  1. C138528
    Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears, and 2 side gear thrust washers from the differential case.


7. REMOVE FRONT TRANSAXLE CASE OIL SEAL

  1. C138708E01
    Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.
    SST
    09950-60010   (09951-00540)
    09950-70010   (09951-07200)


8. REMOVE TRANSAXLE CASE OIL SEAL

  1. C138709E01
    Using SST and a hammer, remove the transaxle case oil seal from the transaxle case.
    SST
    09950-60010   (09951-00650)
    09950-70010   (09951-07100)

← COMPONENTS (from Oct 2006)INSPECTION (from Oct 2006) →