2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT IGNITION RELAY NO. 2

  1. B016200
    Using an ohmmeter, measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω (Battery voltage is applied between terminals 1 and 2)

    If the result is not as specified, replace the relay.

← INSTALLATION (from Jun 2009)INSPECTION (from Oct 2006) →